These last few weeks have been... Shall we say stressful? I may have mentioned the crazy neighbors before, but it finally came to a head last week. They were having what a massive scream-fest accented by what sounded like striking each other and throwing inanimate objects around 4:00-4:30 Thanksgiving morning. Those whole ordeal actually woke me, the sleeping dead, AND Josh who had passed out intoxicated. Needless to say, we called the cops. As usual, the neighbors didn't answer and pretended like no one was home until the cops left, I got a gnarly recording of it all from the bedroom and, after being informed of this third major incident, the landlord has issued them a notice to leave the premises or be evicted. So, that's something to look forward to. However, until they actually LEAVE the other side of the duplex, I have and will continue to feel like I am walking on pins and needles. Now that I have THAT off of my chest...
The semester is winding down and finals are hardly a week away. I don't have many exams to study for, but their are a lot of big projects due soon. I'm trying not to freak out about the final 2D assignment because I caused quite a stir with my last assignment and I'm not sure I can top it! What was the last assignment, you may ask. Well, it was a 9 frame painting of a fish demonstrating the different color schemes. However , since I am blogging from my mobile phone, you'll have to scroll down to see it.
Go ahead. I'll wait...
I think it turned out really well. The color schemes are as follows (top to bottom, left to right):
1. Achromatic - grey scale
2. Monochromatic - many shades and tints of one hue
3. Analogous - two or more colors right next to each other on the color wheel (green, yellow-green and yellow)
4. Cool colors - purples, greens and blues (like water and space)
5. Secondary colors - colors created by mixing primary colors
6. Warm colors - reds, oranges and yellows (like fire)
7. Complimentary colors - two colors directly opposite each other on the color wheel (red-violet and yellow-green)
8. Original image colors
9. Primary colors - red, yellow and blue
The whole project showed me that I'm not that bad of a painter and that I REALLY enjoy painting water.
But, you may have noticed ANOTHER image at the bottom. If you missed it, go ahead and scroll down again. I'll wait...
...
Holy S***! What is that? Is it a graphite drawing of Chris Hemsworth as Thor?! It totally is.
This was brought on by some frustration with the current Drawing project. No one has ever asked my to draw myself in the mirror. I found it quite difficult. A lot of it has to do with the subject matter. It is now apparent that drawing is not something I consider where mirrors are concerned.
So I decided to draw someone else's face to blow off some steam. Actually, I had compiled pictures of the Statue of Liberty as potential references for future projects, but that seemed less relevant to my current study needs.
I don't remember when or why Hemsworth first came to mind, but I made a definite decision around the time the third or fourth drawing of Tom Hiddleston or Tom Hiddleston as Loki hit my Deviant Art DevWatch. I'm not knocking those who like him, but he just isn't my style. Besides, I have a friend who is practically in love with Hemsworth and Thor so I'll have someone to give this to.
Which brings me to my last point. In Non-Westen Art History, we are learning about how many cultures do not see art as a product, but as a force that radiates forth from the artist. Many of these cultures have art that is destroyed or given away once completed because they knew that they can and will create more. So I picked something I knew I would be able to give away to practice this thought process.
I have a possessiveness about my work and have a hard time letting it go. Perhaps I feel that I have left a piece of me with the graphite, charcoal or acrylic paint piled onto a canvas. Perhaps I am just scared to feel rejection, or unimportant if the person should lose or mistreat it. Either way, as someone who is now studying art as a potential profession, I've decided this concept will be important for fighting potential hurtles in the future. I wont be scared of losing pieces of myself with my artwork but will be happy and excited to share and give my talent to others.
Until next time!
Friday, November 30, 2012
Saturday, November 17, 2012
How About Some Metalwork For a Change?
I really need to quit making a habit of only posting ever three weeks. Such is life, I suppose. However, this blog post will serve to demonstrate what the hell I've been doing with my time since the last post!
As some of you may know, I enrolled in a metalworking class this semester. It's been hard work, but having the weight of a finished piece in my hand is very rewarding. I have enjoyed it so much that I've actually signed up for a 1 hour credit next semester so that I can continue to use the studio for some things I have planned. That will come later, though.
This week, I thought it fitting to show off my (mostly) finished hollow construction piece. The term 'hollow' denoted that it was crafted by creating a box like structure with a top, bottom and walls and soldering the entire piece together. I say mostly finished due to the fact that these pictures were taken before I had completed the sanding process, so there are still quite a few imperfections that can be seen in it. Without further a due, here it is:
Pretty sweet, eh? It's a ring, but during the design process, we were told not to think of it as a piece of jewelry but instead as a 'stie-specific sculpture.' I created it to have a hole for three fingers to prevent any tipping. The top part you see here is made of brass while the walls and back were made of copper. All and all, it turned out pretty nice. Sure, there was a little half centimeter stretch where I couldn't get the seam to solder, but I still consider the whole thing a success.
Seriously, though, I'm pretty sure I put a good 40-50 hours into this. If I had managed my time a bit better, I probably could have gotten it perfect, but that's a dangerous path of thought to begin down, so I'll just love it the way it is.
While I'm on the topic of my metalworking, I suppose I could go ahead and post the first two project that we did before this one. I warn you, though, the pictures are not too great.
This was our first project, the layer project. We were to design a minimum three layer piece using three 2x2" pieces of brass, copper and nickel. The design was based off of a set of 'evolutions' we based off of magazine tracings. I believe my original image was of a really interesting interior arch way. Everything was done using cold connections (i.e. no soldering, only rivets). The picture is pretty washed out, but I took it while the piece was actually in the display case at Ellis Hall. I could probably take another since it's back in my possession now, but I need to clean off some finger print gunk that's on it first.
An the simple ring project. The initial designs were a bit more complicated, but, for those who don't know, sterling silver is expensive. And I'm not even talking about fine silver here. I think this tiny design ended up costing me a little over $7 in material and a good 25 hours of work to construct it. She told me what the stone is, but I don't remember. I went with the blue one because it was the perdiest of the stones I had... Though, given my love of Slytherin House, it was a close race between this stone and the green one I had.
Welp, that's all I've got for now. I would say that once I take better pictures I'll post them, but then I'd have to go through and edit the whole damn post and take out all the comments about the horrible pictures and unfinished work. So, when I get around to taking better pictures, I'll put them on Deviantart and post a link here, that cool?
Until next time!
As some of you may know, I enrolled in a metalworking class this semester. It's been hard work, but having the weight of a finished piece in my hand is very rewarding. I have enjoyed it so much that I've actually signed up for a 1 hour credit next semester so that I can continue to use the studio for some things I have planned. That will come later, though.
This week, I thought it fitting to show off my (mostly) finished hollow construction piece. The term 'hollow' denoted that it was crafted by creating a box like structure with a top, bottom and walls and soldering the entire piece together. I say mostly finished due to the fact that these pictures were taken before I had completed the sanding process, so there are still quite a few imperfections that can be seen in it. Without further a due, here it is:
Pretty sweet, eh? It's a ring, but during the design process, we were told not to think of it as a piece of jewelry but instead as a 'stie-specific sculpture.' I created it to have a hole for three fingers to prevent any tipping. The top part you see here is made of brass while the walls and back were made of copper. All and all, it turned out pretty nice. Sure, there was a little half centimeter stretch where I couldn't get the seam to solder, but I still consider the whole thing a success.
Seriously, though, I'm pretty sure I put a good 40-50 hours into this. If I had managed my time a bit better, I probably could have gotten it perfect, but that's a dangerous path of thought to begin down, so I'll just love it the way it is.
While I'm on the topic of my metalworking, I suppose I could go ahead and post the first two project that we did before this one. I warn you, though, the pictures are not too great.
This was our first project, the layer project. We were to design a minimum three layer piece using three 2x2" pieces of brass, copper and nickel. The design was based off of a set of 'evolutions' we based off of magazine tracings. I believe my original image was of a really interesting interior arch way. Everything was done using cold connections (i.e. no soldering, only rivets). The picture is pretty washed out, but I took it while the piece was actually in the display case at Ellis Hall. I could probably take another since it's back in my possession now, but I need to clean off some finger print gunk that's on it first.
An the simple ring project. The initial designs were a bit more complicated, but, for those who don't know, sterling silver is expensive. And I'm not even talking about fine silver here. I think this tiny design ended up costing me a little over $7 in material and a good 25 hours of work to construct it. She told me what the stone is, but I don't remember. I went with the blue one because it was the perdiest of the stones I had... Though, given my love of Slytherin House, it was a close race between this stone and the green one I had.
Welp, that's all I've got for now. I would say that once I take better pictures I'll post them, but then I'd have to go through and edit the whole damn post and take out all the comments about the horrible pictures and unfinished work. So, when I get around to taking better pictures, I'll put them on Deviantart and post a link here, that cool?
Until next time!
Labels:
art,
brass,
class,
copper,
deign,
Ellis,
homework,
jewelry,
metal,
metalworking,
Missouri State University,
MSU,
nickel,
project,
rivet,
silver,
sterling silver,
student,
studio
Subscribe to:
Posts (Atom)